Silly Shell Carrier - Direct to MOLLE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix to mount SC Designs' Silly Shell caddies direct to MOLLE webbing.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 43
- Wydruki
- 2
- Wyświetlenia
- 333
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the silly shell caddies designed by SC Designs, but I wanted to eliminate the bulk added by the Midlock 2. Having shell carriers rigidly fixed to a MOLLE rig reduces flop and makes a rig feel lighter when running, even when loaded down with a ton of Silly Shells.
The backplates and sticcs have been tested in both 95A and 72D TPU and have held up well. The flex on the backplates is required for MOLLE weaving, it also allows the shell caddies to conform to a chest rig/vest/belt more than a rigid plastic.
The clips have a firmer grip than SC Designs' and require a firm tug to remove shells from their place. In my playtesting, these worked out great for fast movement and some light parkour.
Step files provided for your remixing pleasure.
Hardware:
2x M3*10mm button head screw
2x M3 hex nut
Print Settings:
- Sticc - 5 wall, 6 top, 6 bottom layers (That should make these fully solid)
- Backplate - I've tested 5 walls, 5 top, 5 bottom layers, 30% infill. Using more flexible settings should be fine with these, but may have an effect on the dovetail interface with the clip
- Clip - 5 wall, 5 top, 5 bottom layers (Mouse ears/brims may be necessary)
Supports should only be necessary on the dovetail on the backplate, highlighted in blue here.
Parts should all be oriented as such for best results.
A huge thanks to Dryden and HuntardX for testing and feedback!