Hex Parts Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple sorting tray with a few different size compartments; easy to print and get your parts together!
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 255
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE [20220323]: I added a second version with a fillet inside of the deeper cups to help small parts slide up the side when you have your hands full.
I seem to always have parts laying around on my work bench – fasteners, connectors, pins, small parts of a larger model. I decided to model this up quickly and try to keep my work area a bit more clean.
This only took about 26 grams of filament and an hour and a half to print with my normal settings. I printed in some sparkle ABS + that I thought fit a honeycomb theme, but this would work fine in PLA or PETG as well.
I used 4 walls and 5 top and bottom layers with 40% infill but there’s not much infill used as it was designed with those settings in mind.