X-Maxx Two Piece Gear Cover - Improved
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
X-Maxx two piece gear cover
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 540
- Wydruki
- 1
- Wyświetlenia
- 2059
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
X-Maxx two piece gear cover
I wanted a two piece cover so you don't have to disassemble anything on the truck to get the guard in place, while also allowing easier access to the gears when needed. I also wanted to use the original gear cover mounting holes to further simplify the installation.
I'm using the WFO motor mount and their 23t pinion / 35t spur 1.5mod gear combo. There should be enough space to use a 25t - 27t pinion (maybe larger, idk...).
Will need:
(Qty 4) M3x10 machine screws.
(Optional) (2) m3 inserts (short 5mm)
6/10/22 Uploaded a new 2 piece design
Keep in mind the gears generate a lot of heat and PLA will start to deform pretty quickly. If you can I suggest using ABS, Glass filled Nylon or at a minimum PETG.