Thankful HueForge Art Panel – Fall & Thanksgiving 3D Print | No AMS Needed

Create a cozy fall vibe with this HueForge “Thankful” panel, designed to print beautifully on any single-extruder printer — no AMS required. Perfect for Thanksgiving, classroom displays, or seasonal craft fairs, this design layers rich autumn tones for a dimensional look that captures the spirit of gratitude.

Sized perfectly for standard HueForge panels and easy to scale for your setup. Great beginner-friendly print for those experimenting with text-based HueForge art.

Project: Crochet - Thankful.hfp 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 

The Model is 200x200mm in size 
You may print at higher layer heights below the Base Thickness of 0.64mm 
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm 

Filaments Used: 
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6 
#9d432c PLA BambuLab Basic Brown Transmission Distance: 2 
#857f03 PLA Overture Olive green Transmission Distance: 0.5 
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4 
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 
This print uses 6 unique filaments 

Swap Instructions: 
Start with Black 
At layer #9 (0.8mm) swap to Brown 
At layer #11 (0.96mm) swap to Olive green 
At layer #14 (1.2mm) swap to Red 
At layer #17 (1.44mm) swap to Pumpkin Orange 
At layer #21 (1.76mm) swap to Ivory White for the rest.

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:

Arrange the filaments in the AMS in order according to the print.   Assign the 5th and subsequent colors to the AMS numerically.   At the pause, replace the color in slot #1 with the 5th color, resume printing.   If you have more than one AMS or are manually changing filaments,  ensure you have removed the pause before printing.

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase various Thanksgiving hueforge pieces. This collection includes a variety of fun and cute designs to vintage styles that provide more of a feeling of nostalgia and comfort. 

🦃 Thanksgiving Hueforge Collection 🦃 

Want to sell your physical prints of this model? A commercial license is available through my profile.

This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of online tools to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.