The Last X-Maxx Bumper Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiered of buying and replacing the bumper mounts every time you turn on your X-Maxx? I was so I modeled up these…
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 446
- Wydruki
- 2
- Wyświetlenia
- 1916
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Tired of buying and replacing the bumper mounts every time you turn on your X-Maxx? I was so I modeled up these bumper mounts. Hopefully these will be the last bumper mounts you will ever need. Front and rear mounts are included.
Print these bad mofo's with TPU and they will take some serious abuse. Don't bother printing them with anything other than TPU, they are thick and the point was to use a material that was way more resilient to being crushed.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
85-90 cubic subdivision
Filament: Overture TPU whatever
Notes:
100% infill is probably overkill but definitely use more then 50%
I used 6 walls 95% cubic subdivision, .3 layer height with a .4 nozzle. They are holding up great with good stiffness and bounce to withstand some really hard crashes.
Category: R/C Vehicles