PicoBrew Front Bezel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for the injection molded bezel that goes on the front of PicoBrew S/C/Pro
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement part for the injection molded bezel that goes on the front of PicoBrew S/C/Pro
Does a good enough job at keeping steam from the electronics, but you might consider covering the rectangular cutout for the screen with some clear packing tape, as that's the only sensitive area of the bezel. Two versions: Simple and Hexagonal Faced. Please feel free to remix.
This has only been tested on the PicoBrew C but please drop a comment if you find it works on the PicoBrew S without any interference or blocked screen area
If you like this model, please consider a donation:
Print Settings:
Infill of 10%
Wall Count: 4
Top/Bottom Layers: 5
Supports: None
Orientation: I'd leave it the way it's oriented, most surface area on the print bed