Low Profile Feet for the BoxTurtle Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low-profile BoxTurtle Enclosure feet using 2mm rubber pads for sleeker design and better clearance in tight spaces.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 901
- Wydruki
- 1
- Wyświetlenia
- 1592
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
Want to give your BoxTurtle Enclosure a sleeker look 😎? Or do you need a bit more clearance on top 📐? Then have a look at these low-profile feet 🤩! By replacing the original feet with 2mm rubber pads, you can lower your BoxTurtle for a cleaner appearance and improved fit in tight spaces.
Why I Made This
- I needed just this small bit of extra clearance on top of my BoxTurtle Enclosure.
- And by lowering the hard mounts the standard feet interfered with my setup, so I wanted a more compact alternative.
- And of course, simply removing the feet wasn't an option, so I designed these low-profile replacements.
- The result is a more streamlined, modern look for your enclosure.
If you're looking for a simple way to upgrade your BoxTurtle's style and functionality, give these feet a try!
Assembly
Rubber Pad Preparation (Rear Feet Only):
Why? This allows easy access to the bolts for unmounting the rear feet which is required to be able to remove the bottom panel for regular maintenance. |
 |  |  |
 |  |  |
BOM
- 6 pcs. M5x14mm Countersunk Bolts
- 4 pcs. Rubber Pads (self adhesive)
- Diameter: 20mm
- Thickness: 2mm (min)
- Important Note: With 2mm pads, you'll have 1mm clearance between the printed part and desk. Use relatively firm/hard pads, or go slightly thicker.
- That's what I used: Amazon