Thermaltake The Tower 200 front screen adapter

Front screen adapter for 8,8 inch display.
The screen is called LESOWN LCD Module Panel 8.8 inch LCD.
54.72mm/2.15inch x 218.88mm/8.61inch.
You can find it in the famous chinese stores.

The parts to be printed are:
- The display adapter
- The small screen locker.
You can use this on both sides if you don't want to secure the motherboard.
And finally, and I think this is the best way,
- Large locker with the board holder.

The inserts fit quite snugly, but I think it's the safest way to prevent looseness over time.
You can always file down the inserts a bit if they're impossible to fit, although in my case they fit perfectly.

---------------------------------------------

INFIILL 100%
PLA able

If you have a big printer, print the screen adapter horizontally.
Using supports only on the top inserts.

If not, print it vertically, using the diagonal of the base, like I did.
This way will need supports everywhere.

Screw holes are marked on the board support.
If possible, use metal screw inserts. If not, use directly the screws you have.
Insert them carefully so as not to damage the piece or the connection board.

I've printed every piece with an Ender 3.