Duplicator i3 80mm Fan Back Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wasn't impressed with the airflow of the stock fan on my Maker Select V2.1, and I had an Antec 80mm PC fan just…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I wasn't impressed with the airflow of the stock fan on my Maker Select V2.1, and I had an Antec 80mm PC fan just sitting around unused, so I made this back plate so that I could mount the 80mm fan on the control box of the Maker Select. I used some slightly-longer M3 bolts to mount it to the control box. I used some screw inserts to mount the fan to the back plate. I got the screw inserts at McMaster Carr, here:
https://www.mcmaster.com/#catalog/122/3320/=15ctwg9
I printed mine with eSun PETG, .2mm, 50% infill, just a skirt, no brim or raft. I forgot to add supports, so the overhang for the power plug wasn't so pretty, but it gets hidden anyway. I would recommend using supports if you're using PETG.
I designed it in Tinkercad, and I'm very new to CAD. It's not exactly an engineering marvel, but it gets the job done.
Category: 3D Printing