200 MM Lithophane light box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a light box designed to fit curved 200 MM lithophanes. the LED strip this box was designed around was purchased via…
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 926
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
a light box designed to fit curved 200 MM lithophanes. the LED strip this box was designed around was purchased via Amazon:
https://www.amazon.com/gp/product/B07TTP3YTP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
the wireless receiver was glued inside and the break apart connector gets pushed through the hole in the back. it is a tight fit but was designed to keep the plug in place.
i added some hot glue to the strip as well to keep it in place as well as the wireless receiver for the remote control.
the 2 holes in the top are designed to fit 4 8x3 mm round magnets if you choose. but not necessarily needed.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.28
Infill:
20%
Filament: SUNLU PLA+ Black
Notes:
Your lithophanes should have a max thickness of 3mm. Also the box is designed around the lithophanes 3mm borders holding the lithophane in place like a rail system so make sure to set your lithophane border to 3mm as well.
Category: Art