15mm - 3/4 Inch Micro Jet Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Adaptor for the 15mm - 3/4 Inch Irrigation piping to add a Micro Jet, BSP Thread
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
I used to be able to buy these in Bunnings in Australia but they haven't been avaliable for 12 months now. It's a simple adaptor that allows you to add a microjet (I have a heap of brass ones, M5-ish thread) directly to your 15mm irrigation pipe, it screws on to a T piece (see second picture). I believe in Australia our irrigation piping is labelled 15mm (inside diameter) but its actually ¾ inch in the US and UK however we do use the BSP (British Standard Pipe) thread.
Print in ASA or PETG, mine are printed in ASA supportless with a brim at 0.2mm layer quality. I did have to clean a few strands out of the threads on the inside.
My test print was done in PLA and has been operating for the last month no problems, I will now switch it out for an ASA one, but PLA can be used if you just need to get your system (back) up and running fast.
Onshape file if anyone wants/needs it