Pan(Yaw) Tilt(Pitch) Roll model 100% print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed Pan Tilt Roll model demonstrating rotation on three axes. It helps visualize the final orientation in space.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
This model was designed to demonstrate and understand the behavior of the three rotation axes — Pan, Tilt, and Roll.
The assembly helps visualize how each axis moves independently and how their combination defines the final spatial orientation of a camera or sensor.
- Pan (Yaw) — represents horizontal rotation, similar to turning your head left or right.
- Tilt (Pitch) — controls vertical rotation, like looking up or down.
- Roll — shows the rotation around the object’s own axis, simulating a side tilt or camera roll.
All components were designed for easy manual assembly, using 3D-printed screws.
The main goal of this project is to visually understand the relationship between the three axes and how their combined movement results in the final position and orientation of the mounted object.
My print settings:
- Printer: Neptune 4 Pro
- Layer height: 0.16 mm
- Nozzle: 0.4 mm
- Infill: 15%
- Speed: 150 mm/s
- Supports: No
- Filament: I used PLA
- I didn't use brim or skirt.
After, I tested with the same settings, but with:
- Layer height: 0.24 mm
- Fill: 0%
And it worked perfectly!