Gridfinity Inlay Einlage KS-Tools 500.7180 Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity for the 6 mini-screwdrivers of the KS-Tools-Box. If the original retaining clips broke - here is the solution
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The KS-Tools Mini Screwdriver and pliers Toolbox 500.7180 is a nice and useful set of precision engineering craftsmanship. Unfortunately the retaining clips for the six screwdrivers broke very soon, so the screwdrivers get disarranged and you always waste time searching for the needed screwdriver.
So I build a gridfinity that holds the screwdrivers AND fits perfectly into the box. The 4 pads on the sides of the Grid fit into the pockets of the box, so no glueing necessary.
For those not using an MMU there is a set of inlays, marking slotted or crosshead-screwdrivers. Print 2 times+ and 2 times - and 4 rings in the color you like and press them into the corresponding pockets.
Printed with PLA-HI; 0.4mm Nozzle; 20 Percent Infill