Junction Box Ceiling Light 70mm with WAGO 221-412 plus optional lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,68 € – 0,83 € netto (bez VAT)
Dla pliku: LightFitting_70mm__cover_flat_v00_0.20mm_PETG#2_0.2mm_PETG_MK3SMMU2S_43m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,76 € netto (środek widełek).
- Masa podana przez autora
- 11 g
- Czas druku podany przez autora
- 43,2 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Junction box for ceiling light cable outlet with integrated WAGO connectors 221-412 for permanent installation.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 490
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Motivation
Cable outlets for lamps on the ceiling sometimes tend to be “messy”.
Connecting a lamp above your head is somewhat difficult.
Quite often connectors or clamps are missing or soiled with paint.
Heavy lamps have to be suspended with a separate hook.
Managing cables is difficult.
Unused outlets do not look very nice.
Solution
- Junction box with 3 fixed WAGO connectors.
One channel of each connector is permanently connected to the outlet wire from building.
The second channel is used to connect the lamp cable (easy connection and disconnection)
- The connector levers are easily accessable and have a fixed position for easier handling.
- The junction box is permanently mounted with two screws.
- A ceiling hook for heavy lamps can be integrated into the assembly.
- Cables are stored in the box so we get a neat and compact assembly.
- Unused lamp connectors can be closed with an optional lid with bajonette locking mechanism.
Links
https://wago-creators.com/de/design/784
Printing
Material: Prusament PETG → also using a flame resistant V0 variant could be considered.
Brim: none
Support: not required
Slicing: 0.2mm layer height
5 perimeters for solid walls
7 massive layers top + bottom for stable housing
Assembly
ATTENTION:
Make sure the power is switched of permanently while working with mains.
Only qualified personel is allowed to work on electrical installations.
- Print junction box and optional lid
- Snap three WAGO connectors 221-412 firmly into their mounting positions
- Drill the holes necessary for assembly (make sure you do not damage hidden wires)
- Fixate the junction box in mounting position and fix with two screws.
- Mount the ceiling hook if required (center hole)
- Connect the wires from building (L, PE, N) to one chamber of the WAGO connectors
(you should use the same chamber in all connectors for clear structure)
- Cleanly store away excess wire length in the junction box
- Connect the lamp wires to the corresponding WAGO connectors.
- Hang the lamp cable onto the ceiling hook
- Close the lamp cover
- In case the wire outlet is not used, you can close the junction box with the optional lid.
The lid is fixe with a bayonette locking mechanism.
Use
Use at your own risk.
Feedback
is very much appreciated.
This helps me to further improve the design.
Have fun building & using the device.