1 / 4
Carton Corners for Expansion 4mm thickness x150mm height
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corrugated box expansion to increase vertical space.
- Ocena
- 5 / 5
- Polubienia
- 472
- Pobrania
- 692
- Wydruki
- 3
- Wyświetlenia
- 4416
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (1)Kolekcje (625)Powiązane
Designed a corner expansion for 4mm corrugated carton boxes.
Just adjust the heigh in prusa slicer on for your box height. I suggest to put tape around it to increase toughness so it won't fall off easily. Everything shown in photo. Mine is around 60mm in height in the photo. I put my filaments and heat gun inside the box.
