Card deck holder (with Phase10 lid and logo or plain lid)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Card deck holder I made to replace our flimsy Phase 10 box.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Card holder I designed for Phase10 game cards. Will hold 18mm thick deck on each side. Also has insets for magnets and M3 screws to hold the lid on (lightly. I wont support the weight of the deck upside down).
You can print multiple colors like i did for the logo. Prusa slicer recognizes as a logo and will ask if you want to "apply color change automatically". Click the hyperlink to apply. You may need to glue the logo to the lid bit for me it is a press fit.
Also included is a blank lid if you want to use for any other card game that will fit the 18mm depth.
Needed: (if you want to add the magnets)
2 - 8x2.5mm disc magnets
2 - M3x8mm hex socket head screws. Avoid stainless steel screws as they tend to be non-magnetic.