A4T Sherpa Mini SB2209 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount to use SB2209 board from Stealthburner on A4T Sherpa Mini tool head.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 852
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Wanted to avoid purchasing a new tool head control board but wanted better performance than what was available form orm Stock Stealthburner. Mount has been test fit with an A4T tool head on a XOL carriage, but should also work without issue on other supported carriages.
Elevates the SB2209 sufficiently to clear printed parts of the x gantry. Has through holes for zip-ties to secure both umbilical cable and 0.8mm spring steal guide wire
Mount holes designed for m3 heat inserts.
The Small support is to attach the end of the daughter board to the base of the Sherpa Mini.