All Original Ball Joint Animatronics
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ball joint characters of the animatronics from the original FNAF.
- Ocena
- 5 / 5
- Polubienia
- 149
- Pobrania
- 1592
- Wydruki
- 3
- Wyświetlenia
- 7522
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
I a ball joint foxy (https://www.thingiverse.com/thing:1112196) but couldn't really find any of the other animatronics using ball joints (besides a "grim" foxy). So, I decide to make them.
If you have found models of other animatronics I might be able to add them.
I'm just using other models and mainly changing the head and slightly changing other parts.
Below is what I have/will change for each one and what I have done already.
Freddy - Change head, make both arms have hands, and add bowtie - All done (need to test bowtie).
Bonnie - Change head, make both arms have hands, and add bowtie - All done (need to test head and bowtie.
Chicka - Change head, Make both arms have hands, and possibly add bib - All done (need to test bib)
May change the hands.
Heads will need support but nothing else should. Requires rubber bands.
Most of the work the work was from this model was from https://www.thingiverse.com/thing:1112196.
I also used https://www.thingiverse.com/thing:1301204.