Stockpot Mega Tree Printed Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts to build your own version of my 7000 pixel mega tree!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 914
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
All the printed parts I used to make my seed pixel Mega Tree, featured in this video
✨ Features
Designed to work with RGB seed pixels, with a PCB topper to handle carrying data between strings, and small ‘terminal’ PCB's for the bottom of each string.
My version of the tree used a PVC pipe and conduit assembly with 3D printed joiners to form the base of the tree, and a speaker / truss stand to act at the center post.
🔗 Links
Required Hardware / Parts
To replicate my tree exactly, you'll require
- Topper + Terminal PCBs
- 1 x Speaker stand / Centre Post
- Diameter of 60mm at the bottom
- Diameter of 25mm at the top
- Approx. 7000 12v seed pixels @ 25mm pitch
- 20 x Xconnect / RayWu pigtail pairs (20 male / 20 female)
- 6 x 1000mm 33.6mm OD PVC pipes
- 2 x 4000mm lengths of 25mm conduit (cut to length after assembly)
- 24 x M4 x 25mm screws to join hub components
- 8 x M4 x 12mm screws for attaching topper to PCB and securing topper to post
- 12 x Cable ties for attaching outer ring to joiners
Assembly is fairly self explanatory, if you have any questions, let me know in the comments.
Printing Details
Print whichever topper is appropriate for your center post. Hub only suits 60mm pole diameter.
Recommended material: ASA
Layer height: 0.25 mm
Infill: 30–40 % (Gyroid or Grid)
Perimeters: 4+
Supports: Not required
Orientation:
- Topper - Print upside down with PCB mounting surface on bed
- Spoke - Ring Joiner - Print with opening for PVC pipe on the bed
- Hub - Print with opening for PVC pipe on the bed