Gridfinity Tray for Cleco Pliers (Single)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity tray to hold 1 standard cleco pliers.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a follow on to my earlier Gridfinity holder for cleco pliers. I was a little disappointed that holder wouldn't fit one of my cleco pliers, but in order to get both sets of pliers to fit in 1x5 squares, there was no extra room to widen the recess to fit the thicker pliers. But it made maximum use of the space, which was important for the portable cleco kit I was setting up at the time.
This one is going in a drawer of a larger tool box, and only needs to hold one pliers, so I had more room to play with. This is intended to fit an ATS #131 cleco pliers, but I left it loose enough that most others should also fit.
Like my other Gridfinity models, the base is altered to accept 6x3 magnets as a press fit, with the upper surface of the magnet holes modified to make the slicer bridge across correctly for a clean result. Due to the size of this model, I have included sacrificial “mouse ears” in the CAD to give the ends more surface area to help prevent them warping off the bed. These will need to be removed after printing.
The unit pictured was printed out of Overture PLA on my Bear upgraded Mk3S+, using a 0.6mm nozzle, at 0.3mm layer height.