6.5" Car Speaker Minimalist Enclosure Modular Kit DIY
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic design for enclosing a 6.5" car audio speaker for use in home.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Odell Creations Presents the 6.5" Modular Speaker Enclosure Kit! This kit includes files for a bottom/back to the enclosure, a middle section for more mid bass, and the cap/front for speaker installation in conjunction with the speaker mounting bracket cylinder that is also provided as a separate model. There will be multiple versions of some files to allow for more versatility. Model filenames are named accordingly.
Use the pins to align the boxes and glue. Recommended to print outter walls first for pins and inner walls first for box. I designed this model with the intention of printing it with a 0.6mm nozzle at a layer height of 0.28mm. You can skip the middle section if you want the absolute minimal size necessary to enclose the speaker. Include the middle section for better mid bass response. These enclosures were designed with the intention of installing 35w RMS 6.5" full range Sony car speakers. If you plan to use higher power than 50W max, you may find this enclosure needs modification with either stuffing or a port. You will need a terminal block for the back cut out. Here is the link to the ones I used: