Nikon F lens to Canon RF camera adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptor to use older Nikon F mount lenses on Canon R series camera body (RF mount)
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Adaptor to use Nikon F lenses on Canon RF body - only for lenses that have manual focus and aperture control ability. This includes pre-AF lenses as well as some Autofocus era ones - if your lens has physical aperture and focus rings, they can be used here too as manual lenses.
To mount Nikon lens in adapter - looking at the lens front element - align lens dot with the dot on adapter, then rotate it counter-clockwise until it stops. Please note - Nikon lens is friction fit, there's no locking mechanism!
There's no communication with camera, thus you have to enable “Release shutter w/o lens” feature in camera menus, usually hidden in C.Fn section.
I printed mine on Prusa mk3.5, PET-G, 0.4mm nozzle at 0.15mm structural profile. The model should be printed RF mount down (as in file). Please note the model needs supports - as depicted below.
