3D Scanning Turntable Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extends a 125mm diameter turntable to a 200mm diameter turntable
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a 3D scanning turntable extender made for 125mm turntables, such as the Revopoint mini turntable. It slides snugly over the 125mm table and has 49 randomly placed marker recesses (plus one in the center that wasn't randomly generated) for 10mm markers.
I used PETG with a 0.4mm nozzle and 15% gyroid infill, but I imagine this would work just the same with different materials and/or larger nozzles. It's a pretty simple model. Also note that the one in my pictures has 0.2mm recesses for the markers; after installing the markers, I've decided 0.4mm recesses are probably more appropriate, so your print will look just a hair different.