1 / 7
BEST Robotics Radio Antenna Mount #BESTRobotics2025 — zdjęcie 1
1 / 7

BEST Robotics Radio Antenna Mount #BESTRobotics2025

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A system to quickly and securely mount the radio antenna provided in the BEST Robotics returnable kit for Vex V5.

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

School: Rock Canyon High School

Team: RCHS BEST Robotics (Accumetrics)

Team #: 1919

Hub: Front Range BEST

Function: This part aims to create a secure mount for the radio antenna (V5 Robot Radio piece) that allows the controller to seamlessly connect to the brain and effectively control the robot. It provides stability for a valuable part in the success of the robot and is designed for proper storage with easy access to the part. As a returnable piece of our kit, this antenna must be kept pristine and unaltered or damaged. With the mobility of our robot and the constant revision to the design and construction of it, this piece allows for the antenna to stay safe and untouched while also allowing for efficient removal of it as needed. 

Benefit: This piece supports our protection of hub-provided parts and provides a simple and secure mount design that is quick to construct. For BEST robots, it is an easy solution to mount the antenna signal piece to the robot, which is a necessary part for all competition-ready robots controlled by a wireless controller system. 

Design Process: The design began as a basic rectangular prism with a hole in the top to act as a basket that merely holds the system. This brought the issue of mounting the box as well as having space for a cable connection into the antenna. To remedy the connector issue, a hole, just smaller than the antenna piece was added to the bottom of the basket, to be printed with the rest of the piece, allowing for a seamless wired connection. For the mounting issue, holes were added to the back of the box with a diameter meant to fit #8 screws that were provided in the consumable kits. These, in addition to the alteration of the solid front wall into two bar structures, allowed for a swift mounting process as a screwdriver could fit through the gaps to fasten the mount basket to its desired position on a robot. To test, it was first confirmed that the radio antenna fit within the basket and that the cord would fit through the hole in the bottom of the piece. Then, the basket was attached to the robot and all of the connections were made as they should be for competition. Success was determined when the robot functioned properly with the installation of the new piece, and when it was determined that the antenna still had easy access after being placed in the holder. 

Print Settings: This print was completed in a vertical orientation utilizing tree style supports. It is made out of white PLA Basic filament with a 15% infill.