Voodoo Lab Power 3 Plus Mount for Pedaltrain Classic Pro Pedalboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 2-part mount will attach your Voodoo Lab power supply to your Pedaltrain pedalboard.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 2-part mount will attach your Voodoo Lab power supply to your Pedaltrain pedalboard. Use two zip ties to secure the mount (there are slight recesses for the zip ties to lay in). This may work with other power supplies, but I have only tested it with the Power 3 Plus. I printed this with PETG for durability.
I have had my power supply attached by adhesive-backed velcro for a while but the adhesive is failing, so I came up with this work-around. The model has a small amount of play to accommodate velcro on the Pedaltrain frame which is compressed when you attach the mount (see photos), and it assumes about 1mm thickness of velcro between the power supply and the pedalboard.
Feedback and modification requests welcome!
If this model helped you out, please consider following me on Bandcamp or picking up my recent EP: https://echovocation.bandcamp.com/album/mutable-vol-1