SoundBlaster Katana Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prolonged SoundBlaster Katana legs ensuring that soundbar is high enough to hide keyboard under it.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 830
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I was struggling with space on my table so I designed these prolonged legs for SoundBlaster Katana soundbar.
Legs are roughly copying original functional design with few main adjustments:
- They are longer
- Legs are prolonged to back for stability
Soundbar has still similar angle (~3.5 degrees). I find it very stable even when pressing buttons, hitting it, etc.
Printing instructions
I printed my legs on big flat side of leg with PETG and filling 25% and it works great.
It's possible to print without supports, thou tiny internal hidden piece will be lightly fractured (you will not see it, it's under screw). If you want that piece to be nice too, print with Snug suports, it will look nice and it's very easy to remove it.
Possible improvements
I am planning to attach anti-slippery pads from the buttom of legs.
Remixes
You can find original model in OnShape, where you can also export any other format you wish.