1 / 5
Anycubic Kobra S1 / Kobra S1 Combo Poop Chute — zdjęcie 1
1 / 5

Anycubic Kobra S1 / Kobra S1 Combo Poop Chute

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A slightly over-engineered poop chute and container, which can easily be removed.

Ocena
4,25 / 5
Polubienia
46
Pobrania
686
Wydruki
2
Wyświetlenia
2749
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

After searching for a poop chute for the Anycubic Kobra S1 Combo, i decided to make my own with all the good inspirations i saw. It is slightly over-engineered. 

You can remove the container by lifting it up. You need no magnets.

The wall thickness is 2.8mm at the container and 3.2mm ath the chute..

Testet it now few weeks and works great.

You will need no supports if you print it in the original orientation.

I used at the marked position a 12mm long  screw, the others are the orignal one.

I used PETG for the print, but you can also use PLA or something other like ASA or ABS.

The white container had a small collision which was redesigned at the blue one.

Would be happy to see your makes!

Tagi