Magnetic Mount Mod, adapt Buddy3D CoreOne Camera to Prusa XL enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces "lid" of Buddy3D cam for CoreOne, for mounting top-front-center on XL enclosure. Easy, secure, low-profile.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 526
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Printed using the same materials and settings as Prusa used in the original: PCCF, .20 layer height, 15% grip infill.
I mounted it top-front-center of the enclosure, as shown in the pictures. With four magnets total, the grip is pretty strong, and the view of the printbed is great, as also shown in the pictures.
Photos also show how the USB cable is routed to the pass-thru hole in the back of the printer using just 5 zip ties. I'm using an old Apple USB charger to power the camera.
And as also shown in the photos, there is plenty of clearnace between the camera and the cable/Bowden tube harnesses to the print heads.