Humidifier water supply connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the connector to supply water to the evaporator pad in a Honeywell whole-home humidifier.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Update: increased the tightness of the hose fitting by increasing the diameter of the tubing connector and adding a couple of ribs. Also added a chamfer for increased strength.
The connector barb fitting broke off when removing the water tube so designed up a replacement in Fusion 360. Print on its back as in the .3mf file with supports for easiest printing. I just used PLA but might change to PETG if the hot water starts to cause the print to warp.
$0.10 versus $32 online replacement. This is why I like having a 3D Printer.