Cibachrome Mark II Color Processing Drum Compatible Top and Bottom Assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lightproof lids and cup for the Cibachrome Mark II drum. Retains all original functionality.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
EDIT: Added models for the bottom drain cap assembly. Both the drain cap and the light-proofing insert models are included now.
Printing Details:
Material - Black Polymaker ABS
Infill - 25%
Layer Height
Drain cap - 0.2mm
Insert - 0.12mm
Perimeters - 3
Top layers - 5
Bottom layers - 4
Brim - Yes
Print Orientation
Drain cap - STL default
Insert - Flipped 180deg (cone pointing upwards/feet on bottom
Supports: Yes
Both models have been printed and confirmed to fit, but neither has been tested in the developing process yet.
ORIGINAL DETAILS:
Replaces the fill portion of the Cibachrome color processing drum. Retains the lightproof/daylight processing capability of the drum.
Printing Details:
Material - Black Polymaker ASA
Infill - 15%
Layer Height - 0.2mm
Perimeters - 2
Top layers - 5
Bottom layers - 3
Brim - Yes, but untested without
Print Orientation - STL default
Only tested with ASA, but ABS should work as well. Not sure if PLA is resistant enough to color printing chemicals.
Fit is fairly tight, but should press fully into place with enough force (especially after a few uses).
Does not include a model for the bottom (empty) portion of the drum, but can design/upload a model if there's a desire for it.