Simple 1:64 Scale Wall Display for Hotwheels/Matchbox Cars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi Y'all! This is an angled wall stand for 2 1:64 scale cars, which can be used to display your favorite showpieces!It…
- Ocena
- 4 / 5
- Polubienia
- 22
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 340
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Hi Y'all!
This is an angled wall stand for 2 1:64 scale cars, which can be used to display your favorite showpieces! It took me about 2 1/2 hours to print this with an ender 3 and a 20% infill, though i bet this would work fine with around 5% as well.
It may need to also be scaled to 1000% to print with proper dimensions.
As far as actually mounting it to the wall, it has two holes in the back that will fit a standard thumbtack. The thumbtacks can be glued into the holes with a hot glue gun, superglue, model cement... etc. For the angle in the pictures, I used a 45º tilt for the stand, though the stand can theoretically be put at any angle >0º and <90º
Thank you for reading this and hopefully downloading the design! -Icewing177
Category: Toy & Game Accessories