1 / 1
The Kingdom of the Wild Heart - Breath Container of Tears
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D heart clad in medieval decor.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (42)Powiązane
Features:
- Print individual pieces with color of choice. No multicolor print unit needed.
- Prints flat / snaps together for 3D surface on both sides (print shell x 2 & core x 2 for each track).
Part Options:
- Snap Track - With or without tab with hole for hanging.
- Outside Shell - With or without slot for said tab.
- Inside Core - Solid or hollow.
Print Settings I used:
- PLA
- 0.4 Nozzle
- 0.1 Layer Height
- Top/Bottom Fill Pattern: Concentric
- Seam Position - Paint on top where two halves meet
Assembly/Disassembly:
- Assembling works best when sliding the top (bubble) parts into the track and then sliding around until the bottom tip snaps in.
- Conversely, Disassembling works best when trying to open starting with the bottom tip and then sliding the open around until it reached the top.