1 / 3
Printed Motor Casings and Holder for Estes Fin Alignment Guide — zdjęcie 1
1 / 3

Printed Motor Casings and Holder for Estes Fin Alignment Guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An update to the Estes Fin Alignment Guide

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
67
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Estes fin alignment guide is a tool that I use quite often here in the AAEN Fabrication Shop. It comes with three cardboard motor casings. They are 13mm, 18mm and 24mm in diameter. Due to the cardboard casing I have run into issues such as the cardboard casings wear and move around. If the model has large swept fins, the cardboard casing don't extend high enough. Lastly there is no 29mm casing. 

I used Tinkercad to create a series of casings that I could print on my Ender 3. I also created two holders for all of these casings. The first stand is just used to store the casings. The second base holds the casings, along with the fin algnment guide base, fin tabs, and clips. 

It is possible that I may expand on these casings, especially if I start to build a model that needs a taller casing. 

Visit our web site at https://rocketryjournal.wordpress.com Our blog posting on this project can be found at https://rocketryjournal.wordpress.com/2025/01/28/upgrading-the-estes-fin-alignment-guide/ 

Our YouTube channel is at https://www.youtube.com/@AustinAerospace