1 / 7
Hypersonic Grid Fin - SpaceX Falcon 9 - 608 Bearing Edit (Flap and Pitch) — zdjęcie 1
1 / 7

Hypersonic Grid Fin - SpaceX Falcon 9 - 608 Bearing Edit (Flap and Pitch)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix to t4obrien's perfect model. Updated to accept 608 Bearings for flap and pitch rotations.

Ocena
5 / 5
Polubienia
47
Pobrania
210
Wydruki
3
Wyświetlenia
1782
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I've been on the hunt for the perfect hypersonic grid fin model, and t4obrien has done it.

I wanted to modify t4obrien's original model to allow the embedding of 608 bearings for flap and pitch motions.  After reaching out to t4obrien, he provided me with a detailed model that I could manipulate in Fusion360.

I created the “base” to allow for pitch rotation of the grid fin, and then I created a “mount” to allow for the flap hinge.

Painting involved a grey primer coat for the parts, then silver metallic for the grid fin, and flat white for the base and mount.  The bearings are press-fit, and the piece was assembled.  To add additional realism, I ‘weathered’ the underside of the gridfin and mounts with some carbon-black spray paint to simulate a post-flight condition.

To complete this project you will need:

  • 3 x 608 bearings (Amazon)
  • 2 x M3x12 Socket Cap Screws (Amazon) 
  • (Optional) 6 x M3x8 Flat Head Screws (Amazon)

 

 

Tagi