Clickbase baseplate models for the Harbor Freight US General Mini-Toolbox (ready to print)

I've fumbled around to find a ready-to-print Gridfinity baseplate for my Harbor Freight US General mini-toolbox, but they all fell short in one of the following:

• Required magnets, which I didn't want to use.
• Required no magnets but had no way to “hold” the trays in place.
• Were not sized correctly for the HFT mini-toolbox.

With that in mind, I produced this set of Clickbase baseplates, spacers, and connectors. Clickbase is fully compatible with Gridfinity trays and will hold them in place with a satisfying click.

The 3mf file contains all the elements you need. The top baseplate is split into two so it can fit a 256x256mm printer. Print each half and stick them together using the connectors. The top plate will use four spacers (also included): One 10mm spacer on the left, and five 9mm spacers on the top left, top right, right, bottom right, and bottom left.

The drawers are the same size so all you need to do is to print the first plate twice.

It is strongly recommended to print this using PETG, as PLA will flex over time and your baseplates won't hold the trays anymore.

Note: Recently, Harbor Freight released three new colors for the mini-tool: Slate Gray, Purple, and Green. From baseplate models I downloaded online, it appears they also changed the sizes of the drawers (reduced them by a couple mm) which makes most online models for the older boxes not fit. I can't verify that since I do not own a red/black/blue mini-toolbox, so please let me know if this model fits those boxes too.

My thanks to the original authors of the clickbase models and the parametric spacer generator.