1 / 6
Chip Clip - 20-Minutes - Print-in-Place (PIP) - Low Poly - Strong Grip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low-poly, Print-in-Place design for daily use. Delivers a strong, self-sprung clip in under 20 minutes. PETG tested.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Quick Facts
- Design: Zero assembly required; the functional spring mechanism prints in a single piece.
- Speed: Prints in under 20 minutes (19m 50s).
- Function: Durable, integrated mechanism ensures a strong, reliable seal on bags.
- Durability: Performance and retention validated using PETG filament.
Print Settings (Tested on Ender-3 V2)
| Setting | Value |
|---|---|
| Filament | PETG (Recommended for spring retention) |
| Layer Height | 0.20 mm |
| Print Time | 19m 50s |
| Nozzle/Bed Temp | 218°C / 70°C |
| Supports | None required |
- Ensure a clean first layer to prevent the spring mechanism from fusing.
- Optimized for Ender-3 V2 with BLTouch.
👋 Hi, this is an open-source design intended for daily use. If you print one, please share your make and let me know if you have any feedback for future improvements!