Qidi Xsmart3 extension bouncy feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple friction fit feet to elevate and isolate Xsmart3 from ground/table a bit
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Pretty much the title, simple feet to fit onto original Qidi Xsmart 3 feet. Springy shape to reduce resonance to surface below. The front right corner has annoying plastic part next to the feet, hence the cutout version. Other three can use the “normal” version, so print one cutout and three “normal” ones (or just four cutouts, should work fine but I have not tested).
I used PETG for the feet, as other feet had suggestions to print from TPU or other flexible filaments that I don't currently have. Similar design has worked well on my ender 3 so why not here. For other settings, I like the “spring” to have hollow core so I used 2 perimeters with classic generator YMMV. The small cutout on the feet-hole should reduce sagging on overhangs and did not require any post processing (apart from stringing).
Included the F3D file, quite messy as I had to do a few attempts with the friction fit. Rewind the last extrusion (and fillet&chamfer) to undo the corner cutout.