1 / 3
Large Manual Turn Table for 3D Scanning/Displaying Models
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix for 10" plate with larger, stable base. Uses one 608 bearing. Print in PETG/PLA. No rubber foot needed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This remix adapts the original design for a larger 10-inch top plate and includes an expanded base for greater stability and height.
Key features from the original design have been retained:
- The stand is designed to hold a standard 608 bearing.
- The top plate fits snugly onto the bearing.
- 4 access holes are included on the plate for easy bearing removal using a small screwdriver.
Please note that I did not create a rubber foot for this model yet.
I printed the base and plate in PETG, but PLA is also acceptable.
Print Settings:
Print the plate laying flat on its surface.
Supports: Used for:
The 4 access holes (on the plate).
The flat underside inside the base.