Bugbu Anet A8 Z Axis and bed Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Z-Axis Assembly to hold the Anet A8 bed in the Bugbu Core XY printer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Z-Axis Assembly to hold the Anet A8 bed in the Bugbu Core XY printer.
For this to work you need to use 300mm lead screws and linear rods or you cut the Anet A8 ones to size :)
you need to print every part twice. Some tolerances are quite tight but the bearings fit quite nice and don't fall out. Perhaps you need some force to insert the linear rods because those are quite tight in there.
You can use the closed loop Belt mentioned in the Original BOM but you will need a second belt tensioner.
The lead screws and bearings are missing in the cat screenshot.