Harbor Freight Daytona Jack Handle Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pad to cushion the Harbor Freight Daytona floor jack
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
The Daytona 3-ton floor jack from Harbor Freight does not come with adequate padding on the handle. If the metal handle were to bump into a car's body, it could leave lasting scratches or chips in the paint. To remedy this, an additional sleeve can be printed out of TPU to add additional cushioning to the handle.
The existing padding on the handle is Uxcell foam tubing with a 35mm ID and 47mm OD. This padding can be purchased and added to the handle, however, this could make it difficult to assemble or disassemble the 2-piece handle. The model provided here has a cutout for the spring-loaded button pin, which allows the handle to be assembled or disassembled while the padding stays in place.
The OpenScad file for this model has been included. It should be easy to modify this model to fit different floor jacks.
Recommended print settings
- Material: TPU or other flexible filament
- Infill: 15%
- Infill Pattern: Gyroid
- Supports: None
Be sure to orient the model in the slicer such that the Z-seam is aligned with the button pin cutout.