Parametric Laser Focus Gauge Block, 0-6mm Heights for Setting cutting and engraving depths - for OMTech K40/K40+, Cloudray, Thunder Laser, Etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple, parametric gauge block to set laser focusing distance for cutting and engraving material on CO2 lasers
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple, parametric gauge block to set laser focusing distance for cutting and engraving material on CO2 lasers.
It supports material thicknesses from 0mm (for engraving) to 6mm (~¼"), with each height labeled on the block.
the .f3d file is included and is parametric, so you can set the focal distance to be the exact height for your laser after you've performed a ramp test. I personally used and recommend this ramp test file: Laser Cutter Ramp Test Jig
By default, the STL is configured for my OMTech k40+ Laser cutter (2025 Version, with the flat lid), which I found to have a focal distance of ~13.5mm from the nozzle. It has a 50.8mm lens. Your laser is very likely different, so in order for this to be accurate, you must perform a ramp test and adjust the model yourself.
This model was created from scratch by me, but was heavily inspired by Vampyrex13's Model on Thingiverse Here: Cloudray K40 Adjustable Air Assist Nozzle 12mm Lens 50.8mm Focus Gauge
There are two parameters in the Fusion360 .f3d model file:
- focal_distance: This is the focal distance that from the laser nozzle that you've determined using a ramp test. By default, it's set to 13.5mm. This also determines the thickness of the gauge block.
- text_height: This is the height from the bottom of the gauge block to the center of the text, so you may adjust so that it is positioned to your liking. By default, it's set to 5mm. Text size and depth are not parametric by default, but are set to 4mm and 1mm respectively.