10" Raspberry Pi Cluster Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic 4U 10" rack for 4 Raspberry Pis
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 818
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 10" 4U rack for my Raspberry Pi cluster. I designed it to be printable on my MK4S where the 10" pieces will fit diagonally across the bed.
It allows for 4 Raspberry PIs ( I have Raspberry Pi 4/5 boards ) mounted on sleds with a separate sled for a specific 200w charger with 4xUSB-C and 4xUSB-A connectors plus a 5v-powered gigabit switch.
You will need to print:
- 2xSide Panel
- 4xPi Sled
- 1xNetwork and Power Sled
- 5xCombination of Front Panels.
There is 1 panel that has some ingress spacing for cables that won't fit through the cosmetic hexagons.
Screw holes are M3 on the case and 2.5mm on the Raspberry Pi sleds. I have included the .STEP files if you want to resize those holes to be more standard for rack cases.
Gigabit switch: https://www.amazon.com/dp/B0CXD1BGH5
200W charger: https://www.amazon.com/dp/B0D3DCNSS3