Elder Pyroclast, Scourge of the Molten Peaks | 32mm & 75mm Fantasy Miniature | FDM & Resin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed an epic dragon.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🐉 Elder Pyroclast, Scourge of the Molten Peaks
Gargantuan Dragon (Fire), Chaotic Neutral
Armor Class 22 (natural armor)
Hit Points 496 (32d20 + 160)
Speed 40 ft., climb 40 ft., fly 80 ft.
STR 30 (+10) DEX 14 (+2) CON 30 (+10) INT 18 (+4) WIS 17 (+3) CHA 22 (+6)
Saving Throws Dex +9, Con +17, Wis +10, Cha +13
Skills Perception +17, Intimidation +13, Arcana +11
Damage Resistances bludgeoning, piercing, and slashing from nonmagical attacks
Damage Immunities fire, poison
Condition Immunities charmed, frightened, poisoned
Senses blindsight 60 ft., darkvision 120 ft., passive Perception 27
Languages Draconic, Ignan, telepathy 120 ft.
Challenge 24 (62,000 XP) Proficiency Bonus +7
🔥 Molten Presence
Creatures within 30 feet of the Pyroclast at the start of their turn must succeed on a DC 21 Constitution saving throw or take 21 (6d6) fire damage and gain disadvantage on attack rolls until the start of their next turn.
🔥 Lava Surge (Recharge 5–6)
The Pyroclast slams the ground, erupting molten rock in a 60-foot radius. Each creature must make a DC 21 Dexterity saving throw, taking 45 (10d8) fire damage and becoming restrained in cooling magma on a failed save, or half as much and no restraint on a success.
🔥 Legendary Resistance (3/Day)
If the Pyroclast fails a saving throw, it can choose to succeed instead.
Actions
Multiattack. The Pyroclast makes three attacks: one with its bite and two with its claws.
Bite. Melee Weapon Attack: +17 to hit, reach 15 ft., one target.
Hit: 28 (4d10 + 10) piercing damage plus 14 (4d6) fire damage.
Claw. Melee Weapon Attack: +17 to hit, reach 10 ft., one target.
Hit: 22 (4d6 + 10) slashing damage.
Tail. Melee Weapon Attack: +17 to hit, reach 20 ft., one target.
Hit: 26 (4d8 + 10) bludgeoning damage.
Fire Breath (Recharge 5–6). The Pyroclast exhales fire in a 90-foot cone. Each creature in that area must make a DC 24 Dexterity saving throw, taking 88 (16d10) fire damage on a failed save, or half as much on a success.
Legendary Actions
The Pyroclast can take 3 legendary actions, choosing from the options below. Only one legendary action can be used at a time and only at the end of another creature’s turn.
Wing Buffet. The Pyroclast beats its wings. Each creature within 15 feet must succeed on a DC 25 Strength saving throw or be knocked prone and pushed 20 feet.
Tail Lash. The Pyroclast makes a tail attack.
Molten Glare (Costs 2 Actions). Targets one creature it can see within 60 feet. The target must succeed on a DC 21 Wisdom saving throw or be frightened until the end of its next turn.
Character Created in assistance with Tripo3D.
Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.
⚙ Print Specs
Supports: Standard tree auto supports
Category: Characters & Monsters
Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)
Material: Resin or PLA+ for best detail retention
Scale: Heroic 1:10 (adjustable for tabletop use)
Orientation: Crouched pose with daggers supported
🧱 FDM Printing
Use Tree Supports (Default) for optimal overhang coverage.
Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.
Recommended materials: PLA+ or PETG for best surface finish.
Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.
Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.
🧪 Resin Printing
Use the following settings for reliable, high‑detail results:
Printer: Elegoo Saturn 4 Ultra 16K
Exposure Settings:
Layer Height: 0.05 mm
Bottom Layers: 5
Exposure Time: 2.75 s
Bottom Exposure Time: 37 s
Transition Layers: 10 (Linear)
Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s
Advanced Settings:
Anti‑Aliasing: Level 8
Print Time Compensation: Enabled (0.93 s)
Light PWM: 255
Bottom Light PWM: 255
Supports & Orientation:
Use Auto Orientation and Auto Supports (Light) in ChituBox.
Ensure proper drainage and avoid flat surfaces directly on the build plate.