1 / 6
Silica Gel Container for Ziploc Bag Filament Storage
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you store your extra filament rolls in a Ziploc or similar bag, you can print this to also hold silica gel beads nicely in it. It'll keep your filament dry and stop your spool from trying to roll around.
Print Settings
I recommended printing the cover plate vertically with a 5mm skirt around it. Print the spool stand as it comes.

Assembly
Fill the side pockets with silica beads and install the cover plate over them. If it doesn't fit in one way, turn it around and try again. It's like a USB plug lol. This is designed to work with 1kg spools only; 2kg might be too much, but I'm not sure.
All models are man-made; no AI was used.