Steamdeck Screen Attachment Vesa Bracket and Stand for portable screens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter that allows the use of the steamdeck oled screen attachment with portable monitors with vesa.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
The very awesome design of the bracket that holds an oled screen https://www.printables.com/model/1278774-steam-deck-oled-screen-attachment doesn't work with my 14" monitor, and I wanted to try it.
So here is an adapter that should fit most portable screens that have a 75mm 2 screw vesa mount.
There is also an optional stand so you can use this as a regular screen stand instead of this very niche steamdeck screen holder. The base allows for 3 different angles.
The balance is surprisingly good when using it!
You'll need M4 bolts for your screen, and a single M3 13mm bolt to hold the bracket to the bar (there is a screw hole at the top). The M3 may not be needed if the friction fit is tight enough for you.
2 walls, 15% fill, but it's not too fussy. Use precise walls just to make sure the friction fit isn't too tight or too big to fit. You can also make the bar stiffer with more infill/walls.
print with following orientation
