1 / 1
Aziel Roccar – Blade of the Veil | 32mm & 75mm Fantasy Miniature | FDM & Resin — zdjęcie 1

Aziel Roccar – Blade of the Veil | 32mm & 75mm Fantasy Miniature | FDM & Resin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Creating characters for an upcoming campaign.

Ocena
0 / 5
Polubienia
8
Pobrania
62
Wydruki
0
Wyświetlenia
108
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

⚔ Stat Block: Aziel Roccar – Blade of the Veil

Medium humanoid (half-elf), lawful neutral

Armor Class 16 (Chain Shirt + Shield)
Hit Points 84 (13d8 + 26)
Speed 30 ft.

STR 17 (+3)
DEX 18 (+4)
CON 14 (+2)
INT 11 (+0)
WIS 14 (+2)
CHA 13 (+1)

Saving Throws Dex +7, Cha +4
Skills Perception +5, Stealth +7
Senses Darkvision 60 ft., passive Perception 15
Languages Common, Elvish
Challenge 4 (1,100 XP)
Proficiency Bonus +3

🌒 Shadowade Traits

  • Sneak Attack. Once per turn, Aziel deals an extra 13 (4d6) damage to one creature he hits with a finesse weapon if he has advantage or an ally is within 5 ft.

  • Fey Ancestry. Advantage on saving throws against being charmed; immune to magical sleep.

🗡 Actions

Multiattack. Aziel makes two attacks with his Sworn Daggers.

Sworn Daggers. Melee Weapon Attack: +7 to hit, reach 5 ft., one target.
Hit: 8 (1d8 + 4) piercing damage. These daggers are magical and return to Aziel’s grip as a bonus action if thrown.

🛡 Signature Gear

  • Shield of the Veil. Grants Aziel and allies within 10 ft. protection from the charmed condition.

  • Twinned Sworn Daggers. Bound to Aziel’s soul—return to his grip as a bonus action and glow faintly when near illusion magic.

Character Created in assistance with Tripo3D.

Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.

⚙ Print Specs

  • Supports: Standard tree auto supports

  • Category: Characters & Monsters

  • Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)

  • Material: Resin or PLA+ for best detail retention

  • Scale: Heroic 1:10 (adjustable for tabletop use)

  • Orientation: Crouched pose with daggers supported

🧱 FDM Printing

  • Use Tree Supports (Default) for optimal overhang coverage.

  • Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.

  • Recommended materials: PLA+ or PETG for best surface finish.

  • Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.

  • Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.

🧪 Resin Printing

Use the following settings for reliable, high‑detail results:

Printer: Elegoo Saturn 4 Ultra 16K

Exposure Settings:

  • Layer Height: 0.05 mm

  • Bottom Layers: 5

  • Exposure Time: 2.75 s

  • Bottom Exposure Time: 37 s

  • Transition Layers: 10 (Linear)

  • Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s

Advanced Settings:

  • Anti‑Aliasing: Level 8

  • Print Time Compensation: Enabled (0.93 s)

  • Light PWM: 255

  • Bottom Light PWM: 255

Supports & Orientation:

  • Use Auto Orientation and Auto Supports (Light) in ChituBox.

  • Ensure proper drainage and avoid flat surfaces directly on the build plate.

Tagi