Scrog – Hooded Goblin | 32mm & 75mm Fantasy Miniature | FDM & Resin

☠ Stat Block: Scrog – Hooded Goblin

Small humanoid (goblinoid), neutral evil

Armor Class 16 (Junk Shield)
Hit Points 27 (6d6 + 6)
Speed 30 ft.

STR 13 (+1)
DEX 14 (+2)
CON 12 (+1)
INT 11 (+0)
WIS 10 (+0)
CHA 9 (-1)

Skills Stealth +4
Senses Darkvision 60 ft., passive Perception 10
Languages Common, Goblin
Proficiency Bonus +2
Challenge 1 (200 XP)

💀 Brutal Traits

• Nimble Escape. Scrog can take the Disengage or Hide action as a bonus action on each of his turns.

• Bloodthirsty. Scrog has advantage on attack rolls against creatures that are grappled or prone.

⚔ Actions

Multiattack. Scrog makes two attacks: one with his Crude Scimitar and one with his Junk Shield.

Crude Scimitar. Melee Weapon Attack: +4 to hit, reach 5 ft., one target.
Hit: 5 (1d6 + 2) slashing damage. On a critical hit, the target bleeds for 1d4 damage at the start of its next turn.

Junk Shield. Melee Weapon Attack: +4 to hit, reach 5 ft., one target.
Hit: 4 (1d4 + 2) bludgeoning damage. If the target is prone, this attack deals an extra 1d6 damage.

🎭 Untrustworthy

Scrog attempts to fast-talk his way out of combat before attacking or retreating, wheedling in as many lies as he can with his Common yapping.

Character Created in assistance with Tripo3D.

Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.

⚙ Print Specs

• Supports: Standard tree auto supports

• Category: Characters & Monsters

• Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)

• Material: Resin or PLA+ for best detail retention

• Scale: Heroic 1:10 (adjustable for tabletop use)

• Orientation: Crouched pose with daggers supported

🧱 FDM Printing

• Use Tree Supports (Default) for optimal overhang coverage.

• Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.

• Recommended materials: PLA+ or PETG for best surface finish.

• Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.

• Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.

🧪 Resin Printing

Use the following settings for reliable, high‑detail results:

Printer: Elegoo Saturn 4 Ultra 16K

Exposure Settings:

• Layer Height: 0.05 mm

• Bottom Layers: 5

• Exposure Time: 2.75 s

• Bottom Exposure Time: 37 s

• Transition Layers: 10 (Linear)

• Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s

Advanced Settings:

• Anti‑Aliasing: Level 8

• Print Time Compensation: Enabled (0.93 s)

• Light PWM: 255

• Bottom Light PWM: 255

Supports & Orientation:

• Use Auto Orientation and Auto Supports (Light) in ChituBox.

• Ensure proper drainage and avoid flat surfaces directly on the build plate.