Modern Self Watering Planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first two piece self watering pot concept design. It's inspired by many similar self watering pots.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 111
- Wydruki
- 3
- Wyświetlenia
- 1074
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for small plants.
Can be printed in one go on a Prusa Mini.
Fill water to ridge in the spout
If it's not water tight you could try either wood filler or a resin coat on the inside. Personally I used two coats of a UV resin and then put it outside for a bit.
Can be scaled up or down, just keep tolerances in mind. (if you scale the outer shell to 50% you'd need to scale the inner shell to around 46%, likewise if you'd like to scale to 200%, scale inner shell to around 205%.
This is my first upload so please let me know what you think :)