1 / 1
Roxon Companion OEM-like scales (.step included) — zdjęcie 1

Roxon Companion OEM-like scales (.step included)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stock OEM-like Scales (latest model with toothpick and tweezer slots)

Ocena
0 / 5
Polubienia
6
Pobrania
62
Wydruki
0
Wyświetlenia
287
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

These are a direct replacement for the newer companion scales. Tested on my neon green companion. These new scales have the slots for the tweezers and the toothpick via Roxon, so that's also implemented here. You can print these as is, or download the .step files so you can mod these to your liking.

It should be noted that I designed these to be printed without supports. I found that supports weren't yielding very good counter bores in the screw holes. So there is a 100 micron layer that must be removed (very easily) with a razor blade, exacto knife, or drill bit. You can also re-use the original hardware (screws) with these scales as the dimensions are the same as OEM.

Once again, these are stock and mimic the actual tolerances of the OEM scales. With that in mind, printer variance could change fitment. Mine fit perfect with the following settings…

I printed these on the Prusa XL with a .4mm nozzle at .10mm layer height (this is necessary to get the hole support to print, (.20mm layer height will not properly bridge all holes correctly I found) with 5 perimeters, 5 bottom layers, and 5 top layers, with 20% triangular infill. I used Proto Pasta HTPLA-CF @ 220c.

Tagi