1 / 13
XPS04 Hammer-Action Wallet – Mechanical Card Lift EDC — zdjęcie 1
1 / 13

XPS04 Hammer-Action Wallet – Mechanical Card Lift EDC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hammer action Wallet presented by SMACKMAX INDUSTRIES

Ocena
0 / 5
Polubienia
52
Wydruki
0
Wyświetlenia
1965
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables

Presenting XPS04 Hammer action Wallet - Pull the hammer down and watch your cards snap up in a smooth upward cascade. The mechanism redirects force through the frame for a sharp, satisfying click every time. 

  • his wallet is very extra (intentionally). 
  • Holds 4 cards comfortably. 
  • Some parts require support. 
  • 3MF included (Bambu color project). 
  • Burned a lot of hours in CAD fine-tuning the mechanism. 
  • All parts can be removed without disassembling the entire wallet (slide-in + bolt-down design). Depending on filament, abrasive materials may wear your cards over time. 
  • See image for bolt locations 
  • Assembly according to image with bright green, lay on top - dont worry to much everything slides in in full assembly
  • Side slider usage unlocks after time of wear, the click should remain
  • Hardware Needed (you can cheat a bit with bolt lengths) 
    • 2× M3 × 5 mm 
    • 5× M3 × 8 mm 1
    • × M3 × 10 mm 

Interested to see more of my projects? https://linktr.ee/smackmax

Tagi